Offset Support for chuck
This spindle support allows moving the rotation axis of the piece by 12.5 mm, allowing to produce artistic pieces of great effect.
It has an M33x3.5 mm DIN 800 threaded connection and can mount chucks with an M33x3.5 mm threaded connection.
Equipped with two Ø 160 mm balancing discs, it allows you to cancel the unbalance on the lathe of a piece + spindle assembly up to 6 kg.
Balancing the system on the lathe is simple, once the support and the spindle are mounted with the workpiece on the lathe, tightened, lift the lathe motor and completely loosen the transmission belt, in this way the greater weight will go down. Loosen the screws and the lock nuts of the rocker arms and adjust the rockers a little at a time until the system no longer turns on its own, ie it is balanced. Tighten the screws and lock nuts securely.
Balancing the system on the lathe is simple, once the support and the spindle with the workpiece on the lathe have been assembled, tightened, lift the lathe motor and completely loosen the drive belt, in this
way the greater weight will go down.
Loosen the screws and the lock nuts of the rocker arms and adjust the balancing discs a little at a time until the system no longer turns by itself, i.e. it is balanced.
Tighten the screws and lock nuts securely.
Attack |
Weight kg |
Height |
è balancing disk |
Art |
M33x3,5 mm |
6,0 |
88 mm |
160 mm |
4282 |