Expertise, Experience, and Assistance -
Exclusive distributor for Italy of JET and Promac
Categories Woodturning Woodturning chucks Self-Centering Finishing Clamping Plate
Self-Centering Finishing Clamping Plate
Product no.: JMR300933Not in stock
Made up of two thermoplastic disks, complete with nine tightening pins, this accessory allows to grip workpieces concentrically.
It is used to remove chuck marks, as well as to finish and polish workpieces.
Unloose the back of the knobs: in such a way the disks rotate and the clamping pins are able to grip the workpiece.
The rubber avoids to damage the wood. The shape of the standard pins (art. 4060) is suitable to grip bowls. When using this clamping plate, the speed limit allowed for the lathe is 500 RPM. Remember that this is a finishing clamping plate, therefore try to make light movements and do not remove too much material in one time.
The photo shows the 3 different types of pins available. Check the accessories links.
Technical data:
| Contraction | |||||
| Attacco | Kg | è min | è max | Art. | |
| 300 | M33x3,5 | 2,5 | 98mm | 240mm | 3988 |
Why is this chuck better than the chuck jaws?
First of all, because of its speed, in fact it is itself a spindle, therefore ready to use, equipped with M33x3.5 mm connection to be mounted directly on the spindle shaft of the lathe.
You will not have to disassemble and repair the spindle jaws and therefore save time twice.
It is self-centering and "ready" for any diameter included in the field of action, you will not have to mount and reassemble 8 studs in the diameter affected by that bowl and change for the next one.
Equipped with intermediate pins you can find two other series of optional pins to better adapt to your work.
It consists of a continuous circle and therefore safer! You do not run the risk of running during the rotation in the rectors that make up the claws for filming.
Accessories
| Product | Note | Status | Price | |
|---|---|---|---|---|
|
|
43.20 € * | ||
|
|
34.50 € * | ||
|
|
from 36.20 € * | ||
|
|
from 32.90 € * | ||
|
|
from 48.70 € * | ||
|
|
from 30.70 € * | ||
|
|
101.00 € * | ||
|
|
98.80 € * | ||
|
*
Display accessory details
Prices incl. VAT, plus delivery
|
||||
Pin Jaws with 9 mm Bore art 3906
0
Spare parts 9 pieces Pin Set
Interchangeable Insert Drive Center for Lathe Chucks
Type 6/2sC Bearing guided concave cutter with step
Pack 5 pcs. Abrasive disk 230 mm G
Insert complete with Termite Hollowing Cutting Tip
Set 9 extra tightening elementsWe also recommend
 |
 |
 |
Customers who bought this product also bought
Filter parts for AC 400 air filter
from
19.20 €
*
|
Long Hole Cylinder Boring Bit with Replaceable HSS Knife
from
39.50 €
*
|
SC4 Wood chucks art 3835
189.90 €
*
|
Clear Paste Wax
18.00 €
*
|
Woodturning Calliper
from
37.30 €
*
|
Multipoint Drive Center
from
39.50 €
*
|
Pen tube insertion tube
13.20 €
*
|
Set bushing for shaving Hair Knot
3.90 €
*
|
Eccentric spindle D 25 mm
75.80 €
*
|
Reversible Termite Ø 14mm
57.10 €
*
|
Browse this category: Woodturning chucks