The Hobby JWBS 9x Bandsaw is ideal for the compact hobby, suitable for those who require a reliable machine and for small-scale work.

It offers exceptional performance and capacity for a band saw of its size and is designed for effective cuts and long life.
The flywheels are dynamically balanced and are built robustly for a car of this size, providing impressive torque and power.

Dotazione:

Mitre guide

parallel guide

Saw blade

Light

SABRE 250 10è bandsaw

Band wheels are the drive mechanism for the blade. For a quiet and smooth cutting performance it is important that wheels are well balanced. For accurate blade tracking good quality tyres must also be fitted.
Record Power Bandsaws
All our larger bandsaws (BS300E upwards) have strong, heavy cast iron band wheels to increase the flywheel effect. They are dynamically balanced and have thick rubber tyres for easy tracking and longevity. This is essential on larger machines to ensure they can withstand the tensioning forces of larger blades and the rigours of heavier use.

In addition, we believe that the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market.

The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance

Band Wheels
The improved, heavier band wheels give smooth and powerful performance.

Double-Sided Rip Fence Mount
The fence mount design allows the fence to be placed to the right-hand side of the blade, with the fence extrusion secured on the opposite side of the mount. Ideal for supporting timber when cutting with the table at an angle.

Fine Adjustment
The rip fence mount features easily accessible screws for fine adjustment of the fence in relation to the blade, for increased accuracy.

Integral Rip Fence Holder
When the rip fence is not in use it can be stored safely on the side of the machine.

Cam-Action Blade Tension Adjustment
Usually found only on larger machines, the strong tensioning system features a cam-action tension release to help make blade change quick and easy.

Easy-Adjust Blade Guides
The spring-loaded blade guides can be adjusted quickly and easily without tools.

Table
A solid, finely ground cast iron table provides an ideal and low friction work support.

Offset Door Hinges
Even with the bandsaw positioned with the spine against the workshop wall, the offset hinges enable the door to open far enough to give good access for blade changes without the need to take the door off or move the bandsaw away from the wall.

Dual Speed
The higher speed is ideal for general wood cutting and the lower speed is suited to harder or brittle timbers, to reduce the chances of burning.

Equipment:

Parallel guide

Saw blade

Shown with optional stand and pedal wheel kit.

The BS 250 premium mini band saw is a professional machine for small and detailed work
 
A true compact size band saw, designed to offer a good machine at a very competitive price without forced savings in a small and economical model. The only one of this size with a cast iron top.
We include upper and lower bearing blade guides similar to the professional range.
250mm flywheel and a generous 120mm cutting capacity.
The rigid parallel guide is precise and easy to use on the large cast iron worktop.
The pivot and tilt fulcrum gives sturdy support to the table.

Equipment:

Parallel guide

Mire guide

Saw blade

Premium Band saw RP BS300 S

Premium Band saw RP BS350S

The SABRE-350 band saw is an evolutionary step from the highly regarded and market-leading Record Power premium bandsaws.

It is characterised by some new features that make it more effective, accurate and easier to use than any other machine in its class.

Featuring an 1100 W output (1 1/2 horsepower) motor coupled with the heavy-duty cast iron band wheels, the SABRE-350 packs a real punch and can handle cuts to its full capacity with ease.

The two speeds, which are slightly faster than comparable machines, make it ideal for cutting non-ferrous metals as well as wood.

The cam-action fence adjustment, spring-loaded guides, cam-action blade tension release and double-sided fence mount make this a machine that is so easy to setup and use it leaves you free to concentrate fully on the project at hand.

• Heavy Duty Cast Iron Band Wheels: Dynamically balanced and heavy, the wheels provide a flywheel effect during use, contributing to the power and effectiveness of the machine.

• Double-Sided Fence Mount: The unique fence mount design allows the fence to be placed to the right hand side of the blade, with the fence extrusion secured on the opposite side of the mount.

• Cam-Action Blade Tension Adjustment: Release and re-apply blade tension instantly using the cam-action handle. This makes changing blade simple and fast and if the new blade is the same as the old, the correct tension can be instantly re-applied on fitment.  

• Easy-Adjust Blade Guides: The spring-loaded blade guides can be adjusted quickly and easily without tools.  

• Resaw Bar Included: The resaw bar is easily installed to the fence and can be used when resawing long pieces - the timber pivots on the resaw bar to compensate for grain variations in the wood to avoid the cut wandering.

• Heavy Duty Cast Trunnion: This industrial-style trunnion gives rock-solid support to the table and can be easily adjusted up to 45°using the substantial rack-and-pinion system and locked firmly in place with the large and easily accessible locking lever. 

• Integral Cabinet Base: The cabinet provides useful storage space for tools and timber. 
• Cam-Action Fence Positioning: Aligning the blade with the fence is extremely fast and easy, requiring no adjustments to the fence rail. 

• Useful Height Guide: The blade guard features a scale to show the cutting height, an ideal reference for accurately setting the guides to the required position. 

• Table Levelling Pin: Perfect alignment of the table is ensured with the simple-but-effective levelling pin. 

• Inspection Window for Easy Tracking: The inspection windows allows the blade to be seen on the wheel from the side, making blade tracking much easier. 

• Rack and Pinion Blade Guide Adjustment: the blade guides move on a sturdy rack and pinion system to provide optimum support. 

• Easy Fence Movement: The pads beneath the fence ensure it remains parallel to the table whilst allowing frictionless movement across it. 

• Heavy Duty Tensioning System: The blade tension assembly of the SABRE-350 gives ample strength to support the largest blades and ensure faultless performance for the heaviest of cuts.

Technical data:

The RP BS400 Premium is an ideal tape for the turntable, generous size is a great value for money

The BS400 bandsaw offers high quality, industrial features and large capacities to the mid range bandsaw market. This machine brings affordable solid performance and reliability within reach of the discerning woodworker. Like all bandsaws in the range, a solid cast iron table provides unrivalled stability and solidity. An industrial style cast trunnion supports the table and allows it to be tilted one-handed on a rack and pinion. Dynamically balanced cast iron bandwheels ensure superior strength and reduced vibration - a feature not usually found on other machines at this level. The 2hp motor and 305mm depth of cut mean this machine can cope easily with large timbers yet is also equally capable of fine, precise cuts and veneers. The exceptional value for money this machine offers is difficult to appreciate without seeing the machine first hand. If you are in the market for a high specification mid-range bandsaw, be sure to seek out the BS400 at your nearest dealer or at one of our many shows and compare it to other bandsaws on the market.

Standard equipment

Saw blade

Team fence

Mitre fence

Suction nozzle 100 mm