Bench for dovetail joints CdR 200 Art. 2933

Solid, robust and beautiful make the difference between any piece of furniture and a piece of furniture of great quality. A drawer with dovetail joints makes the furniture indestructible even if you place heavy objects. Your drawer will be up to 200 mm in height with a thickness of the front min 10 mm and max 25 mm, the joints made by special cutters with a guide bearing are 10 and 15 mm depending on the thickness of the wood. With the CDR 200 board, you can use any milling machine because the surface where the machine rests is free of obstacles, and the template is followed by a special cutter equipped with a bearing. The only limit is the precision of the milling spindle that must turn in the axis. In fact, if the concentricity is not perfect, the bearing, forced to turn in a comb, could break. For this reason, in the CDR200 v.2014, the comb surface is made of methacrylate, offering anti-vibration support to reduce the problem permanently. If, however, your machine still causes problems, you must use the smart base (Art 3849)

With front panel (photo 1) or exposed (photo 2) depending on your style and personality. With this device, you can make precise dovetail joints. In a single pass, you will make the male and the female of the joint. You only have to register the start of the joint. Make drawers like fig. 2.Even the back of the drawer can be made with the dovetail effect, you will certainly increase the strength and the value of your work.