The best lathe on the market, very stable, silent and robust.
The JWL-1421VS professional bench lathe is a compact large diameter lathe based on the JWL-1221VS. With dimensions similar to it, it can handle parts with a diameter of up to 350 mm (14 inches): bowls, plates, dishes and other objects.
Solid cast iron bed
The JET novelty in transforming, with many design improvements, optimally the 3 rotation speeds from 60- to 3600 rpm.
An electronic speed control system
Digital speed display
Reversal of the direction of rotation
Tension and release the drive belt with a quick locking lever
Quality tailstock with trapezoidal thread
The machine belongs to the new professional Jet line and combines modern control electronics with improved mechanical parts.
It has significantly increased rigidity: compared to analogues of the previous series and competitors, the bed has become wider and the total weight has increased by 10 kg; oversized bearings are used.
The rotation speed can be adjusted using the integrated electronics and the three quick-change pulleys, the selected value is shown on the digital display.
There is also a reverse rotation switch on the control panel, which is indispensable for some types of work, for example when sanding.
The transmission of the rotation from the motor to the spindle is carried out by a 6-groove PloyV belt; three pairs of pulleys are provided to select the required power range. The belt is quick-change via a patented ratchet lever.
The eccentric locking systems of the tool rest and tailstock make adjustments just as easy and quick. There is an index dividing device and a locking pin of the loaded mandrel, which also simplifies the assembly/disassembly on the faceplate mandrel (this requires only a key).
The bed extension can be purchased separately, in this case, the maximum distance from centre to centre will increase to 1010 mm.
|Stock number 220V
|Ø turning over the bed
|Ø turning over tool holder
|Distance between centres
|Speed 3 ranges
||60÷900, 110÷1.800, 220÷3.600 giri/min
|Spindle passage hole
||ø 9 mm
|Tailstock passage hole
||ø 9 mm
|Conical spindle and tailstock connection
|Power output S1 100
|Power consumption S6 40
Tailstock with removable tip
Tool holder 150mm and 350mm
Piece holder pad 75 mm