ATHENA ZBG 1-40

The first specific sharpener for gouges. Innovative!
Specifically designed for sharpening woodturning gouges.
Made in HSS, high-strength steel resistant to high temperature.
You must have to take care of your tool, being careful to the sharpening of the cutting edge.

Memorize many angles
A turner has many gouges, often similar but sharpened with different angles to better adapt to the wood or the specific processing.
But remembering all the angles is not easy, nor setting the sharpening tools each time, so we have set up a simple system based on colours that allow us toè memorize èover 30 different positions.
You can mark your gouges with the colours of the combinations you have programmed.

2 Simple or Traditional sharpening systems
Athena allows you to sharpen gouges with a simplified guide system. This system with two degrees of freedom allows anyone, even with little experience, to sharpen both profiling and excavating gouges very well.
The optional support allows sharpening the same gouges with 3 degrees of freedom, with a long wing, with a guided position and easily replicable as height and front angles, but with the necessary experience to replicate the sharpening movement.

Sharpening of gouges with CBN grinding wheel
Professional system for sharpening gouges for turning and carving based on a Super Abrasive CBN (Borazon) wheel.
The support of the CBN Super-Abrasive is made of metal to dissipate the heat of the sharpening well and quickly, the CBN Super-Abrasive wheel being made of metal is robust.
It has great durability, gently touching with the tool to obtain a sharpening fit for a professional.

Sharpening the way you prefer all the long-wing excavation gouges!
The same sharpening device for profiled, excavation and long-wing gouges (like fingernail or finger) allow the sharpening with 3 degrees of freedom.

Certain references at your fingertips.
Having certain references is possible: on the machine, in an ergonomic position, we have put a position reference at 45, 60 and 70 mm.
Possibility to pre-set the sharpening devices andè memorize ètheir position, in order to exactly replicate the angles of the cutting edge always the same.

Sharpen with the same angle
The main sharpening system consists of a Ø 12 mm bar parallel to the two wheels.
On this wheel, it is possible to insert both the device for sharpening of gouges for profiling and excavation and optional accessories.
A special 4-position revolver stop determines the distance between the bar and the grinding wheels, to obtain the desired angle.
The revolver system allows the position to be restored with accuracy over time.
A base with predetermined positions facilitates the protrusion of the gouge from the sharpening device.
Rotation block allows sharpening the gouges with two different positions.
The combinations of the three devices, base, revolver and rotation blocks, allow numerous combinations of sharpening angles.

The Athena 1-40 can mount the second wheel as an option

Standard equipment:
Finishing wheel 240x40 CBN finishing
Revolver sharpening position system
Sharpening bar
Sharpening device for profiled gouges

Optional
Position system for longwing
Device for sharpening planes
Bed and chisel sharpening plan
Various devices for sharpening termites

ATHENA ZBG 2-40 EVS

The first specific sharpener for gouges. Innovative!
Specifically designed for sharpening woodturning gouges.
Made in HSS, high-strength steel resistant to high temperature.
You must have to take care of your tool, being careful to the sharpening of the cutting edge.

Memorize many angles
A turner has many gouges, often similar but sharpened with different angles to better adapt to the wood or the specific processing.
But remembering all the angles is not easy, nor setting the sharpening tools each time, so we have set up a simple system based on colours that allow us toè memorize èover 30 different positions.
You can mark your gouges with the colours of the combinations you have programmed.

2 Simple or Traditional sharpening systems
Athena allows you to sharpen gouges with a simplified guide system. This system with two degrees of freedom allows anyone, even with little experience, to sharpen both profiling and excavating gouges very well.
The optional support allows sharpening the same gouges with 3 degrees of freedom, with a long wing, with a guided position and easily replicable as height and front angles, but with the necessary experience to replicate the sharpening movement.

Sharpening of gouges with CBN grinding wheel
Professional system for sharpening gouges for turning and carving based on a Super Abrasive CBN (Borazon) wheel.
The support of the CBN Super-Abrasive is made of metal to dissipate the heat of the sharpening well and quickly, the CBN Super-Abrasive wheel being made of metal is robust.
It has great durability, gently touching with the tool to obtain a sharpening fit for a professional.

Sharpening the way you prefer all the long-wing excavation gouges!
The same sharpening device for profiled, excavation and long-wing gouges (like fingernail or finger) allow the sharpening with 3 degrees of freedom.

Certain references at your fingertips.
Having certain references is possible: on the machine, in an ergonomic position, we have put a position reference at 45, 60 and 70 mm.
Possibility to pre-set the sharpening devices andè memorize ètheir position, in order to exactly replicate the angles of the cutting edge always the same.

Sharpen with the same angle
The main sharpening system consists of a Ø 12 mm bar parallel to the two wheels.
On this wheel, it is possible to insert both the device for sharpening of gouges for profiling and excavation and optional accessories.
A special 4-position revolver stop determines the distance between the bar and the grinding wheels, to obtain the desired angle.
The revolver system allows the position to be restored with accuracy over time.
A base with predetermined positions facilitates the protrusion of the gouge from the sharpening device.
Rotation block allows sharpening the gouges with two different positions.
The combinations of the three devices, base, revolver and rotation blocks, allow numerous combinations of sharpening angles.

The Athena 2-40 EVS is equipped with a professional inverter that allows the control of some interesting functions such as controlled start and stops and speed selection.
The normal speed of use is 1400 rpm or position 4 of the potentiometer, but to get a better finish it can go up to 2900 rpm

Standard equipment:
Grinding wheel 240x40 CBN forming
Revolver sharpening position system
Sharpening bar
Sharpening device for profiled gouges

Optional
Position system for longwing
Device for sharpening planes
Bed and chisel sharpening plan
Various devices for sharpening termites

Dry Sharpening Base Set. With this set the sharpening of the turning gouges will be very simple. It can be used with all bench wheels and allows the correction of the wear of the wheel from a diameter of 250 mm to 130 mm. Prepared for device angulation at 15 ° / 30 ° and 45 °.

Regulus mitre angles sharpening Art 4350

Sharpening device for Roughing gouge art 4187

This device is specific for the resharpening of roughing gouges and gouges with traditional face sharpening.

It is inserted on the support arm and perfectly guides the rotation phase of the gouge during regrinding.

Sharpening device Profiling pendulum art 4151
This is a gouge jig for sharpening roughing gouges, fingernail profile bowl and spindle gouges.

It is fixed to the support arm and can be tilted and features a reference ring, which is useful to grind at a fixed bevel angle, in case it is used on a bench grinder.

Regulate rotation block
This block allows you to choose 2 different position for grinding the profile gouges at the right position.