Universal tool box in aluminum and TIG welded by expert hands offers an exceptional capacity of almost 6 liters. It can be easily mounted with both the beveled part at the top and at the bottom to better adapt to your bike. In the assembly kit we supply 3 rubber-coated metal bands for tubes from 8 to 12 mm, three for tubes from 16 to 22 mm and three Teflon spacers for mounting on any type of side case holder frame. the locking system can be mounted both downwards and upwards in the box in order to leave the lock in the most comfortable position for you. Painted with epoxy powder, it is equipped with a gasket to improve water tightness. It can easily contain all the tools we need on a trip, the tire repair canister, the tubless repair kit, a mini compressor or the always useful rain cover; assembly is simple, a pencil is enough to mark the position of the screw holes and a drill to drill the toolbox in the correct position for your bike.

The universal Rally navigation tower was born from the need to transform our beloved enduro motorcycles into full-fledged rally bikes. You too can finally take your old enduro to moto rally events without having to mount those uncomfortable handlebar plates. Prepared for the mounting of ICO or RNS trip masters, during the purchase phase, you can choose whether the model for Roadbook Holder F2R. MigTec or the version for digital instruments that has the predisposition for the USB socket. The navigation tower is complete with a 5 mm thick anti-shock and anti-scratch polycarbonate windshield and an approved light mounted on vibrating rubber pads. High resistance 5745 “Paraluman light alloy structure, very light and long-lasting. This structure has been specifically designed to have many adjustment possibilities, the whole tower can be adjusted both in height and in inclination up to 5 degrees as well as the plates mounted on it have total freedom of adjustment. Matt black powder coated and annealed in the oven. Assembly is simple once the front end of the bike has been disassembled with the steering head free and bare, just drill two small 7 mm holes on the steering head following the drilling template provided, insert the counter plate with the threaded pins from inside the head tube. And block from the outside the support on the dinghy itself, interposing the anti-slip rubber provided.

The universal Rally Mig Tec navigation tower was born from the need to transform our beloved enduro motorcycles into full-fledged rally bikes. You too can finally take your old enduro to moto rally events without having to mount those uncomfortable handlebar plates. Prepared for the mounting of ICO or RNS trip masters, during the purchase phase, you can choose whether the model for Roadbook Holder F2R. MigTec or the version for digital instruments that has the predisposition for the USB socket. The navigation tower is complete with a 5 mm thick anti-shock and anti-scratch polycarbonate windshield and an approved light mounted on vibrating rubber pads. High resistance 5745 “Paraluman light alloy structure, very light and long-lasting. This structure has been specifically designed to have many adjustment possibilities, the whole tower can be adjusted both in height and in inclination up to 5 degrees as well as the plates mounted on it have total freedom of adjustment. Matt black powder coated and annealed in the oven. Assembly is simple once the front end of the bike has been disassembled with the steering head free and bare, just drill two small 7 mm holes on the steering head following the drilling template provided, insert the counter plate with the threaded pins from inside the head tube. And block from the outside the support on the dinghy itself, interposing the anti-slip rubber provided.

The universal Rally Gps Nav navigation tower was born from the need to transform our beloved enduro motorcycles into full-fledged rally bikes. You too can finally take your old enduro to moto rally events without having to mount those uncomfortable handlebar plates. Prepared for the mounting of ICO or RNS trip masters, during the purchase phase, you can choose whether the model for Roadbook Holder F2R. MigTec or the version for digital instruments that has the predisposition for the USB socket. The navigation tower is complete with a 5 mm thick anti-shock and anti-scratch polycarbonate windshield and an approved light mounted on vibrating rubber pads. High resistance 5745 “Paraluman light alloy structure, very light and long-lasting. This structure has been specifically designed to have many adjustment possibilities, the whole tower can be adjusted both in height and in inclination up to 5 degrees as well as the plates mounted on it have total freedom of adjustment. Matt black powder coated and annealed in the oven. Assembly is simple once the front end of the bike has been disassembled with the steering head free and bare, just drill two small 7 mm holes on the steering head following the drilling template provided, insert the counter plate with the threaded pins from inside the head tube. And block from the outside the support on the dinghy itself, interposing the anti-slip rubber provided.

If you have purchased a Rally Gamma Zinken Sport experience navigation tower and then decide to equip yourself with a different navigation system, you can do it without problems. We have provided a specific kit for each navigation system and the possibility of mounting it on the frame of the universal Rally navigation tower. All plates are designed for the passage of cables and the assembly of the ICO or RNS trip masters both for the Roadbook F2R, MigTec roadbook holder . In the version for NAV Gps digital instruments, we have the predisposition for the USB socket and the plate to mount two smartphones horizontally or vertically or a large tablet and of course the digital speedometer and tachometer or a Trip master. The plates are in high resistance light alloy 5745 “Paraluman”, it allows numerous adjustments both in height and in opening, very light and of great duration. Matt black powder                                               coated and annealed in the oven.

If you have purchased a Rally Gamma Zinken Sport experience navigation tower and then decide to equip yourself with a different navigation system, you can do it without problems. We have provided a specific kit for each navigation system and the possibility of mounting it on the frame of the universal Rally navigation tower. All plates are designed for the passage of cables and the assembly of the ICO or RNS trip masters both for the Roadbook F2R, MigTec roadbook holder . In the version for NAV Gps digital instruments, we have the predisposition for the USB socket and the plate to mount two smartphones horizontally or vertically or a large tablet and of course the digital speedometer and tachometer or a Trip master. The plates are in high resistance light alloy 5745 “Paraluman”, it allows numerous adjustments both in height and in opening, very light and of great duration. Matt black powder                                               coated and annealed in the oven.

If you have purchased a Rally Gamma Zinken Sport experience navigation tower and then decide to equip yourself with a different navigation system, you can do it without problems. We have provided a specific kit for each navigation system and the possibility of mounting it on the frame of the universal Rally navigation tower. All plates are designed for the passage of cables and the assembly of the ICO or RNS trip masters both for the Roadbook F2R, MigTec roadbook holder . In the version for NAV Gps digital instruments, we have the predisposition for the USB socket and the plate to mount two smartphones horizontally or vertically or a large tablet and of course the digital speedometer and tachometer or a Trip master. The plates are in high resistance light alloy 5745 “Paraluman”, it allows numerous adjustments both in height and in opening, very light and of great duration. Matt black powder                                               coated and annealed in the oven.

With this adapter, you can mount GPS supports on the Roadbook holder plate. Produced in structural aluminium alloy 5754 with great strength and corrosion resistance, 3 mm thick, it is then painted with anti-scratch powder which increases its durability and beauty. It comes with screws for its fixing.

Roof rack plate is perfect for soft bags. Equipped with large slits for the straps to pass, it is prepared with holes to house the Givi MonoKey top case restraint system. Produced in structural aluminum alloy 5754 with great strength and corrosion resistance, 3 mm thick, it is then painted with anti-scratch powder which increases its durability and beauty. The plate is supported by two large structural steel brackets so as to withstand the weight of your load even on rough terrain, thus ensuring resistance even in the case of fully loaded bags or cases.

Plate dimensions: 250 x 25 x 280 mm.

The plate can only be mounted with our lower support, which varies according to the motorbike (for example, the roof rack)