Balancing support for spindle M33x3.5 mm art 4321
This support allows you to securely fix the spindle or a backing pad with M33x3.5 mm connection and reset the vibrations generated by the piece that has not to balance. It is possible to balance the eccentric weight of the wood, using the two balancing discs, to reduce vibrations during processing and improve the stability of the lathe.
The advantage of this system is the long life of the lathe bearings and the reduction of vibrations that disturb the machining.
Equipped with two Ø 100 mm balancing discs, it allows you to cancel the imbalance on the lathe up to 2 kg.
Both sides are produced with the M33x3.5 connection with DIN800 flange.
Balancing the system on the lathe is simple, once the spindle is mounted with the workpiece on the lathe, well tightened, lift the lathe motor and completely loosen the transmission belt, in this way the greater weight will go down. Loosen the screws and the lock nuts of the rocker arms and adjust the balancing discs a little at a time until the system no longer turns by itself, i.e. it is balanced.
|
LT |
Connection |
ART |
25 x 55 mm |
93 |
M 33x3,5 |
4321 |