Cutterhead set for concave grooves Ø148

This set is designed to cut perfect concave grooves into the workpiece or on the edge of the workpiece. By inserting some spacers between the two elements (included in this set) you can adjust the precision of the radius produced. It is not possible to work with only one of the two elements, which compose this set. 3 different sizes of radius knives can be fitted on this cutterhead. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Cutterhead set for concave grooves Ø140

This cutter is designed to cut perfect concave grooves. Thanks to the technical feature of this tool, it can enter the wooden piece deeper than the profile of the knive. 3 different radius knives can be fitted on this cutter. On the smaller cutter it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body in steel

Spare parts

Cutterhead set for concave grooves 

This cutter is designed to cut perfect concave grooves. Thanks to the technical feature of this tool, it can enter the wooden piece deeper than the profile of the knive. 3 different radius knives can be fitted on this cutter. On the smaller cutter it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body in steel

Cutterhead with radius and inclined knives

This cutterhead is universal. It can fit knives with a radius of 5, 6, 8 or 10 mm, which are 45°inclined on the upper side. It is supplied with knives of radius 10 mm. The other knives must be ordered separately. You can buy a special bearing of calibrated diameter, which enable you to following and round your work piece without using the guides of your spindle moulder machine.

Cutterhead with radius and inclined knives

This cutterhead is universal. It can fit knives with a radius of 5, 6, 8 or 10 mm, which are 45°inclined on the upper side. It is supplied with knives of radius 10 mm. The other knives must be ordered separately. You can buy a special bearing of calibrated diameter, which enable you to following and round your work piece without using the guides of your spindle moulder machine.

Rounding cutterhead set

This cutterhead produce perfect rounded egdes. 3 different sizes of radius knives can be fitted on each cutterheads. Thanks to theØ 3 exit angle of the radius knives a perfect finish of the working surface can be obtained. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body of light alloy

Rounding cutterhead set

This cutterhead produce perfect rounded egdes. 3 different sizes of radius knives can be fitted on each cutterheads. Thanks to theØ 3 exit angle of the radius knives a perfect finish of the working surface can be obtained. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body of light alloy

Rounding cutterhead set

This cutterhead produce perfect rounded egdes. 3 different sizes of radius knives can be fitted on each cutterheads. Thanks to theØ 3 exit angle of the radius knives a perfect finish of the working surface can be obtained. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body of steel

Rounding cutterhead set

This cutterhead produce perfect rounded egdes. 3 different sizes of radius knives can be fitted on each cutterheads. Thanks to theØ 3 exit angle of the radius knives a perfect finish of the working surface can be obtained. The knives are made of hard metal (HW). On each cutterhead three knife sizes can be fitted: on the smaller cutterhead it is possible to fit the knives of radius 12,5 mm, 15 mm and 17,5 mm, while on the bigger one the knives of radius 20 mm, 22,5 mm and 25 mm.

Body of steel

Eagle beak cutter for staff bead