Turn the wood - Italian book You can't improvise turners, you need to know the techniques and learn some important basic rules.

The book explains how the lathe is made and how it works, how to use spindles, tailstocks, gouges and accessories, as it returns longitudinally and transversely.

The book is completed by some projects with step by step photographic sequences to obtain splendid results.

2020 edition, with the collaboration of Gamma Zinken, 126 pages

Termite hook HSS 15mm with limiter art 4284

it's specifically conceived for working long grain on green wood. It can be used even for works across the grain. Provided with adjustable limiter in order to work in total safety (the use without limiter is suggested only to expert woodturner).

It is reversible and can be re-sharpened, so that it can be used several times.
It can be used both on straight and on jointed shanks.

HSS Termite HSS Semi-Professional for hollowing 3823

Based on termite hook with limiter, if used with its limiter, it allows excellent control in all work
phases. Recommended for those with turning bases but not a great experience.
Specific for making excavations on wood with large quantities of material to be removed in a short
time, possible use even in the case of briars with gaps and shortcomings.
The termite rod i's 14mm, recommended for work with a distance from the fan up to 140 mm.
Include's termite hook with HSS limiter Ø 15 mm, rod Ø 14mm with non-slip handle Length
300 mm.

Professional Termite HSS 4285

Based on termite hook with limiter, if used with its limiter, it allows excellent control in all work phases. Recommended for those with the foundations of turning and experience.
Specific for making excavations on wood with large quantities of material to be removed in a short time, possible use even in the case of briars with gaps and shortcomings.
The termite rod i's 17mm, recommended for work with a distance from the fan up to 280 mm.
Include è termite hook with HSS limiter Ø 15 mm, rod Ø 17mm and non-slip handle Length 600 mm.
 

Kit Termite Hollow HSS art3897

Based on termite hook with limiter and equipped with the joint for working under the square, it mounts a �14mm rod with a plate to better manage and distribute the lateral cutting effort.
Used with its limiter, it allows excellent control in all work phases.

Recommended for those with the foundations of turning and experience.
Specific to carry out excavations on wood with large quantities of material to be removed in a short time, possible use even in case of briars with gaps and shortcomings.
The termite rod is � 17mm, the central joint serves to manage the lateral effort and must not be used as an extension to go further.

Includes � termite hook with HSS limiter � 15 mm, rod � 14 mm with two joints and non-slip handle Length 300 mm.

HM Termite for scraper Straight Shank with wood handle art 4130

Made of anti-usury HM metal and suitable for any type of wood, in particular for hard and abrasive woods.

It can be used to improve the finishing both in long grain and cross vein wood, both inside and outside.

Keep the handle higher than the centre of the workpiece. If used for the bottom of the bowl cross vein keeps the cutting edge slightly inclined and rotated aboutØ30 to encourage the cutting of the wood, obtaining so a chip.

Moreover, it is possible to exploit the same shaft for all the finishing scrapers listed among the spare parts. The 16mm ones both for the inside and the outside, while those with measures 23mm only for external.

Can fit all spare blanket.
Included in the pack: Ø 16 mm HW round scraper.

 

HSS Termite for hollowing with Straight Shank
Conceived for hollowing operations across the grains also in case of briarwood with holes. If used with its limiter, it guarantees a good control.

The termite shaft is available in 2 sizes: the 14mm diameter is suggested for bowl up to 120mm of depth and the 17mm diameter, suitable for reaching up to 240mm of depth.

The straight shank must be fitted into a silicon covered handle available on request (art. 4030, 4125 , 4143).

Included in the pack: round HSS Ø 16 mm termite with limiter.

HSS Termite for hollowing Entry level with wood handle 4127

HSS Termite for hollowing with Straight Shank with wood handle

Based on a standard termite, if used with its limiter, it allows excellent control in all phases of
work, even for the less experienced.
Specific to carry out excavations through veins on wood, even in case of briars with gaps and
shortcomings.
The termite rod is available in diameter 14, recommended for vessels up to 140 mm.

Included in the pack: round HSS Ø 16 mm termite with limiter.

HSS straight hook termite Ø 10mm

TheØ 10mm HSS straight hook termite is specific for long grain works. The reduced diameter provides a good control, it also has an open side to improve the chip release allowing to work on the side of the vase.
It can be used on the straight shaft. If it is assembled on the termite-holder jointed insert, check the angles of attachment on the wood, difficult and not easy operation.
Like all the tools of this type, in case of violent "impact" it could break.

Recommended for experienced woodturners.
 

Inclined HSS Hook Termite Ø 10mm

TheØ 10mm HSS inclined hook termite is specific for long grain works. The reduced diameter provides a good control, it also has an open side to improve the chip release allowing to work on the side of the vase.
It can be used on the straight shaft. If it is assembled on the termite-holder jointed insert, check the angles of attachment on the wood, difficult and not easy operation.
Like all the tools of this type, in case of violent "impact" it could break. Recommended for experienced woodturners