inclined HSS Ring Termite Ø 10mm

Specifically conceived for long grain works, the reduced diameter provides a good control even if it tends to get clogged. Is recommended to experienced woodturners.

Art. 4224 offers an excellent control during the side working of the bowl.

The inclined edge improves the cutting of the woody fibre and the smoothness of the movement. It cannot be turned to work the bottom. It can be used both on straight and on jointed shanks.
 

Termite Cutter for hollowing across the grain
Specific for works across the grain with limiter included. Suitable for beginners and experience workers.

This limiter prevents the removal of an excessive portion of material during the termite attack. It is possible to adjust the position of the limiter pressing it directly in the area where you want more removal by fixing it screwing the screw.

We recommend to use the limiter every time. The limiter can be modified by the woodturner according to his experience.

Reversible HSS Termite for working Long Grain it's specifically conceived for working long grain on green wood. It can be used even for works across the grain. Provided with adjustable limiter in order to work in total safety (the use without limiter is suggested only to expert woodturner).

It is reversible and can be re-sharpened, so that it can be used several times.
It can be used both on straight and on jointed shanks.

Termite Cutter for hollowing across the grain
Specific for works across the grain with limiter included. Suitable for beginners and experience workers.

This limiter prevents the removal of an excessive portion of material during the termite attack. It is possible to adjust the position of the limiter pressing it directly in the area where you want more removal by fixing it screwing the screw.

We recommend to use the limiter every time. The limiter can be modified by the woodturner according to his experience.

Technical table

Handle for termite rods Anti-slip rubber coated handle where you insert the specific termite-holder shanks (not included in the pack).

It is available in two different lengths.

The termite-holder shank slides into the handle so that you can adjust the tool length of 200 mm.

This shaft is supplied with the first jointed insert, where it is possible to assemble any of the listed below termite holders. It must be fitted into a handle to be purchased separately, available in two different lengths.

The shaft can slide into the holder, so that it is possible to regulate the tool length.

The termite shaft is available in 2 sizes: the 14mm diameter is suggested for bowl up to 120mm of depth and the 17mm diameter that is suitable for reaching up 240mm of depth.

The central joint has the function of sharing the torsion straining partially compensating the torque moment. It is not recommended for straight vases.

Do not use the central element only as an extension to excavate straight vases, otherwise you could break it. For this operation there is the termite with straight shaft.
 

Insert complete with Termite Hollowing Cutting Tip
Ideal for hollowing operations. It guarantees a good work control.

Suggested for soft and medium-hardness wood across the grains. Experts can use it on wet woods without chip limiter.

Used with both 10 mm and 16 mm diameter hollowing termite cutters.
Includes: HSS Ø 16 mm termite cutter with limiter

Termite grinding wheel Ø15x25mm

Especially designed for re-sharpening the termite hollowing cutters

Undercut plate for termite shaft
This device must be inserted in the shaft .

Its aim is to distribute the cutting effort of the termite on the tool rest.

It slides on the shaft, so thath you can adjust and fix it in any part of the shaft itself, depending on the work you are doing.

HSS Hollowing Termite Tip with Straight Shank with wood handle

Conceived for realize internal hollows in a very quick and efficient way. It is possible to rotate the hollowing cup if the blade has lost its cutting edge.
It requires a good dose of mastery in the use because it works with significant portions of material; The optional Ø14mm insert provides better control because it is smaller.

Recommended for excavations up to 140 mm depth.
Includes: Ø 16 mm HSS termite cup